Which loop goes through the eye when threading an embroidery needle?

max ·

Hands holding a green-handled wire-loop threader through the eye of a needle pointing downward
Blue thread folded through a wire loop beside the eye of a diagonal metal needle
Blue thread extending through a needle eye toward a green-handled threader on the right

With a wire-loop needle threader, put the wire loop through the needle’s eye first, then put the embroidery thread through that larger loop. Pulling the threader back carries a fold of thread through the eye—the small opening at the blunt end of the needle. These three views follow one blue-thread preparation sequence before stitching begins.

Find the needle eye and the wire loop

The first photo shows the thin wire loop projecting to the left of the upright needle, while the green handle remains on the right. The needle’s point hangs below. In the second view, blue thread is folded through the wire loop. Follow the two different openings: the metal eye belongs to the needle; the wider, flexible loop belongs to the threader. Putting thread into the wire loop lets the tool carry it through the smaller opening.

Follow the blue fold through the eye

In the third view, the blue fold has passed through the needle’s eye and extends toward the threader on the right. The next task is to free the tail from the tool and draw that end through. The temporary fold used for threading does not mean you must stitch with both ends together. The stills do not establish the needle size, fiber, or number of strands, so they cannot tell you which needle to buy for a particular project.

Check the needle-and-thread fit before stitching

The linked supplies guide makes the next check concrete: prepare two separate strands for a first outline, leave a short tail at the eye, and stitch with the long end. If the strands snag during threading, try an embroidery needle with a larger eye. Then test a few stitches on scrap fabric; the needle should pass without dragging the cloth or leaving holes wider than the thread. A threader helps move thread through an eye, but it does not make a tight needle-and-thread combination fit. Choose the tool and needle for the strands you actually plan to use.

Related resource

What Supplies Do You Need to Start Hand Embroidery?

Explore this craft

Embroidery

Inspiration and guides on embroidery.

Explore Embroidery